What Is a Meca-Quartz Chronograph?

Watch guide · 3 min read

A meca-quartz chronograph is a hybrid watch movement that combines the precision of quartz with the mechanical feel of a traditional chronograph. You will also see it written mecaquartz or mechaquartz. Nivada Grenchen uses meca-quartz movements in the Autochron, the Chronoking and the F77 Chrono.

In short

  • Quartz keeps the time: accurate, with a battery that lasts about three years.
  • A mechanical module runs the chronograph: the seconds hand sweeps smoothly and snaps back to zero.
  • At Nivada Grenchen: the VK67 in the Autochron, the VK63 in the Chronoking and the VK64 in the F77 Chrono.

How a meca-quartz chronograph works

While the watch keeps time using quartz, the chronograph uses a mechanical module. That is what allows the seconds hand to sweep smoothly and reset instantly, like on a mechanical chronograph, while the time stays as accurate as quartz.

Close-up of a Nivada Grenchen meca-quartz chronograph movement with its battery, on a movement holder
A meca-quartz movement: the quartz base and battery, with the chronograph module on top.

For a closer look at the three calibres, read VK63, VK64, VK67: meca-quartz calibres explained.

The Autochron: a vintage meca-quartz chronograph

The Nivada Grenchen Autochron Meca-Quartz is inspired by a rare Autochron prototype from the 1970s, discovered in the brand's archives.

Nivada Grenchen Autochron Mecaquartz chronograph on a steel bracelet, worn with a leather jacket
The Autochron Mecaquartz, 38 mm, with its VK67 movement.

Preserved for decades, its distinctive dial and tachymeter layout became the inspiration for the modern Autochron, now powered by the VK67 meca-quartz movement with a date.

The Nivada Grenchen meca-quartz chronographs

Nivada Grenchen Autochron Mecaquartz with black dial and steel bracelet

Autochron

Movement
VK67 meca-quartz, with date
Diameter
38 mm
Water resistance
20 ATM
Signature
Three counters and a tachymeter bezel
Discover
Nivada Grenchen Chronoking Mecaquartz Racing Black on a steel flat link bracelet

Chronoking

Movement
VK63 meca-quartz
Diameter
38 mm
Water resistance
10 ATM
Signature
Racing and Inter.Bezel editions
Discover
Nivada Grenchen F77 Chrono Mecaquartz with blue woven dial and integrated steel bracelet

F77 Chrono

Movement
VK64 meca-quartz
Diameter
38 mm
Water resistance
10 ATM
Signature
Integrated steel bracelet
Discover

What is the tachymeter on a chronograph?

The tachymeter is a scale on the bezel or the edge of the dial. With the chronograph, it lets you calculate a speed over a fixed distance. To use it:

  1. Start the chronograph when the movement begins.
  2. Stop it after one kilometre or one mile.
  3. Read the average speed per hour on the tachymeter scale, where the chronograph seconds hand stopped.
Nivada Grenchen Autochron Mecaquartz with black dial, cream sub-dials and tachymeter bezel on a leather strap
The tachymeter bezel of the Autochron.

The original Autochron prototype

The Original Autochron Prototype of the 1970s

"There is a lot of talk now about 'prototype' watches. We are, however, very happy to sell this as a genuine test piece by Nivada in as-new condition (only a few tiny hairline scratches from storage!) it has never been worn.

We believe that these watches were made in only around 20 examples and were never commercially available. To us, the most interesting element of this watch is the singer dial that shares some of the details of the Rolex Daytona. The lume on the dial and hands has taken on a stunning, rich patina. Additionally the watch features a bi-directional rotating bezel, date feature and red depth rating. The steel bracelet is in outstanding condition.

This watch is in completely untouched condition and we have decided to not even open this time capsule. The watch is running fine, but for everyday wear a service might be recommended."

Bulang & Sons

Browse the collections:


FAQs

A meca-quartz movement is a hybrid: a quartz module keeps the time, and a mechanical module runs the chronograph. It is also written mecaquartz or mechaquartz.

The quartz base keeps the hours and minutes and drives the chronograph module. When you press the pusher, the chronograph seconds hand sweeps smoothly and resets instantly, like on a mechanical chronograph.

Start the chronograph when the movement begins, stop it after one kilometre or one mile, then read the average speed per hour on the tachymeter scale where the chronograph seconds hand stopped.

Keep reading

More guides and stories from the Nivada Grenchen journal.

Explore the journal